Steel Building
Insulation
Insulation is an important part of any metal building project and one that needs to be considered early in the project as insulation could impact the design and cost of the metal building.
Is Insulation Needed?
When speaking to potential customers regarding their steel building project, we always inquire as to their plan for insulation. Often, the response is “I’ll insulate the building later if it turns out that it needs it” or “I have not really thought about steel building insulation”.
Steel building insulation is an often over-looked and neglected area of planning a metal building project. Yes, insulation can add to the cost of the project in the short-term. However, the savings that proper insulation and professional installation can return over the life of a building is very substantial – not to mention the improved comfort level of the people inside the building. This is especially true with projects in regions with extreme heat such as Arizona, New Mexico, Nevada, and California.
In addition to energy savings, properly insulated building will be less likely to have condensation issues – which are particularly challenging to deal with in places like Florida, Georgia, Alabama, Arkansas, Tennessee, South Carolina and North Carolina. We often muse at steel building owners who claim their roof is leaking – only to learn that the “leaking” roof is really just condensation caused by both Mother Nature and the owners desire to save money and forgo insulation at the time of purchase.
Steel buildings that do not have roof insulation are prone to condensation issues as during the day the hot sun heats up the roof panels and interior of the building. At night, when the sun sets and temperatures fall, the difference between the air temperature and warm roof panels creates the same condensation that a cold glass of water does when left on your kitchen table in the summertime. Over time, condensation issues can not only cause damage to the steel building, but can also cause damage to the valuable items stored inside.
White Vinyl Backed Insulation
While there are many different kinds of steel building insulation, for most projects, the industry standard white-vinyl backed fiberglass insulation is the perfect mix of cost and performance. Standard white vinyl-backed steel building insulation comes in R10 (3″), R11 (3 1/2″) R13 (4″) and R19 (6″) and is similar to the standard fiberglass insulation that is commonly used in the walls and attic spaces of our homes.
The primary difference between white vinyl-backed metal building insulation and that used in residential homes, is that one side is bonded with a thermoset resin that creates a uniform layer of white vinyl. This backing plays an important part in protecting the insulation from damage originating from any activities taking place on the inside of the building as well as providing a moisture barrier. Additionally, the bright white color helps to reflect interior light which results in a much brighter interior space.
White vinyl-backed insulation is installed during the erecting of the steel building. After the red-iron frame is erected, the insulation is draped over the red-iron frame with the white vinyl side facing the inside of the steel building. Wall and roof panels are then installed – resulting in the insulation being “sandwiched” in place between the panels and the frame. The image above shows this very clearly, and we have more high-resolution images of insulation in our Metal Building Insulation Options web page.
The Buck Steel Advantage
Whether you are considering a 40′ x 60′ metal garage, a 10,000 sq. ft. steel warehouse, a 3,000 sq. ft. airplane hangar, a 30,000 sq. ft. open steel riding arena, or a new steel church for your congregation, a steel building project can sometimes be intimidating to navigate alone. Whether for personal or business use, you want to minimize the cost of your steel building project while maximizing the benefit it provides.
Why not give yourself The Buck Steel Advantage and have a reputable metal building supplier, serving the steel building customer for nearly 20 years, with 1,000’s of completed projects guide you through the metal building process?
Request A Quote Today or Call (866) 574-2825 to speak to a member of our team.
We welcome your comments and questions!